Omgev

Meld is a visual diff and merge tool targeted at developers. It provides two- and three-way comparison of both files and directories, and has support for many popular version control systems. It might even help you to figure out what is going on in that merge you keep avoiding.

Partition management software programs let you create, delete, shrink, expand, split, or merge partitions on your hard drives or other storage devices.

• Change both External Diff Tool and Merge Tool to Custom. In the Diff Command field enter the full path to the vsdiffmerge.exe. In the Diff Command field enter the full path to the vsdiffmerge.exe. For VS 2015 and below you can find it in the Visual Studio installation folder, under Common7 IDE subfolder.
• I'm looking for instructions on using any merge tool with source tree. Preferably a built in or default one so I don't have to worry about installing something new. I'm on a Mac and when I open 'External diff' it comes up with something called FileMerge and I can't make it do anything - selecting 'choose right' does nothing.

You can certainly partition a hard drive in Windows without extra software, but you won't be able to do things like resize them or combine them without some extra help.

Safe, easy to use partition tools weren't always available, and even when you did find something you liked, it was expensive. These days, there are plenty of completely free disk partition software programs that even the novice tinkerer will love.

Whether you're expanding your Windows system partition, shrinking it to make room for an operating system dual-boot setup, or combining your two media partitions for those new UHD movie rips, these free disk partition tools will sure come in handy.

MiniTool Partition Wizard Free

What We Like

• Supports lots of common disk partitioning tasks

• Lets you extend the system partition without having to restart

• Simulates changes before you save them

• The program is really easy to use

• Works well in all modern versions of Windows

What We Don't Like

• Dealing with dynamic disks is not supported

• Some features that look free are only available if you purchase the program

MiniTool Partition Wizard includes more partition management tools than most similar programs, even ones you might pay for.

Not only does the free MiniTool Partition Wizard support regular functions like formatting, deleting, moving, resizing, splitting, merging, and copying partitions, but it also can check the file system for errors, run a surface test, wipe partitions with various data sanitization methods, and align partitions.

In addition to the above, MiniTool Partition Wizard is able to move the operating system to a different hard drive as well as recover lost or deleted partitions. There's also a file recovery program, disk space analyzer, and benchmark tool built in.

Windows 10, 8, 7, Vista, and XP are the supported operating systems.

One thing I don't like about MiniTool Partition Wizard is that it doesn't support manipulating dynamic disks.

AOMEI Partition Assistant SE

What We Like

• Includes an easy-to-use, step-by-step wizard

• Changes you make are queued and not applied until you specifically apply all of them at once

• Lots of useful features are included

• Many of the options are readily available without having to sift through menus

• Can run from a bootable program to work with a hard drive that doesn't have an OS installed

What We Don't Like

• Some features are only available if you pay for them

• Unable to convert between primary partitions and logical partitions

• Can't convert dynamic disks to basis disks

AOMEI Partition Assistant Standard Edition has a lot more options that are out in the open (as well as hidden away in menus) than many other free partition software tools, but doesn't let that scare you away.

You can resize, merge, create, format, align, split, and recover partitions with AOMEI Partition Assistant, as well as copy whole disks and partitions.

Some of the partition management features with AOMEI's tool are limited and offered only in their paid, professional version. One such feature is the ability to convert between primary and logical partitions.

This program can be used in Windows 10, 8, 7, Vista, and XP.

You can also use AOMEI Partition Assistant to create a bootable Windows flash drive, move an operating system to an entirely different hard drive, and wipe all the data from a partition or drive.

Active@ Partition Manager

What We Like

• It's really easy to use and understand

• Some changes you make can be restored from a backup

• Many common disk partitioning tasks are supported

What We Don't Like

• Can't copy partitions

• Extending the system partition might not work for you

• Won't downsize locked volumes

Active@ Partition Manager can create new partitions out of unallocated space as well as manage existing partitions, like resizing and formatting them. Simple wizards make it easy to walk through some of these tasks.

No matter what kind of file system you're using, the free Active@ Partition Manager tool should be able to handle it, with support for all the common ones, like FAT, NTFS, HFS+, and EXT2/3/4.

Active@ Partition Manager includes other features, too, like imaging a whole drive for backup purposes, converting between MBR and GPT, creating FAT32 partitions as large as 1 TB, editing boot records, and rolling back changes by auto-backing up partition layouts.

When Active@ Partition Manager resizes a partition, you can define the custom size in either megabytes or sectors.

Unfortunately, Active@ Partition Manager can't resize locked volumes, which means it won't let you change the size of the system volume.

• Someone else probably checked into this already, but it was commented that the source code of the offending URL attempted to load a Chrome extension, but that it was one that didn't show up in the Chrome web store. However, I am still seeing tons and tons of connections from 127.0.0.1 (plus a huge range of port numbers), linked to many processes on my machine, all of which look like things that are supposed to be running (Google Drive Sync, my employer's Sophos update service, Firefox -- I've been using only Firefox since this started). Best video tool for using on mac and google chrome. Take that for whatever it's worth -- I don't know enough to know whether this is a bad sign or perfectly normal..

Active@ Partition Manager should work just fine with Windows 10, 8, 7, Vista, and XP, as well as Windows Server 2012, 2008, and 2003.

Active@ Partition Manager is also able to enlarge the system partition, but in our testing we find that it always results in a BSOD. There's more on this in the review.

EaseUS Partition Master Free Edition

What We Like

• Easy to understand with lots of useful options

• Lets you protect the program with a password

• Makes it easy to upgrade the system drive to a larger HDD

• Several helpful options and functions

• Changes are previewed before they're applied

• The program updates often with improvements and new features

What We Don't Like

• Doesn't work for commercial use; only personal

• No support for managing dynamic volumes

• You have to restart the computer to extend the system partition

• Can't convert between MBR and GPT

• Setup tries to install another program

Managing the size of a partition in EaseUS Partition Master is dead simple thanks to their easy to use slider that lets you drag left and right to shrink or expand a partition.

Changes you apply to a partition in EaseUS Partition Master aren't actually applied in real time. Modifications exist only virtually, which means you're only seeing a preview of what will happen if you save the changes, but nothing is actually set in stone yet. Changes don't take effect until you click the Execute button.

I particularly like this feature so things like expanding and copying partitions can be done in one swipe instead of having to reboot between each operation, thus saving tons of time. The list of pending operations is even shown on the side of the program so you can clearly see what will happen when you apply them.

You can also password protect EaseUS Partition Master, hide partitions, upgrade the system drive to a larger bootable drive, merge partitions, defragment a drive, and copy Windows to a different hard drive.

One thing I don't like about this program is that several features are only available in the full, paid version, but are still clickable. This means you might sometimes try to open something in the free version only to be prompted to buy the professional one.

EaseUS Partition Master works with Windows 10, back through Windows XP.

Partition Master's setup routine will install EaseUS Todo Backup Free and a couple other programs along with the Partition Master..unless you uncheck that option.

GParted

What We Like

• Works no matter what operating system is installed (or even if there isn't one)

  Final fantasy xiv character creator. It's been playable from the start, been on the Mac client since day one, you just need a decent Mac with a decent GPU (no, your 2011 Mac will not run FFXIV =). They clearly posted the requirements, which they should have done in the first place.

• Every change can be applied nearly instantly without a reboot

• Lets you hide partitions

• Adjusting the size of a partition is really easy

• Supports lots of file systems

What We Don't Like

• Takes longer to start up because you have to boot to the software

• Partitions are easy to miss because they're hidden in a menu

• Takes much longer to download than most disk partitioning programs

• No redo option (just an undo)

GParted runs entirely from a bootable disc or USB device, but it still has a full user interface like a regular program, so it's not at all difficult to use.

Editing a partition's size is easy because you can choose the exact size of the free space before and after the partition, using either a regular text box or a sliding bar to visually see the size increase or decrease.

A partition can be formatted in any one of several different file system formats, some of which include EXT2/3/4, NTFS, FAT16/32, and XFS.

Changes GParted makes to disks are queued up and then applied with one click. Because it runs outside the operating system, pending changes don't require a reboot, which means you can get things done that much quicker.

A small but particularly annoying issue with GParted is that it doesn't list all the available partitions on one screen like most other free disk partitioning programs. You have to open each disk separately from a drop down menu, which is actually easy to miss if you're not sure where to look.

GParted is around 300 MB, which is much larger than most of the other programs on our list, so it may take some time to download.

Cute Partition Manager

What We Like

• Runs on any computer, with or without an OS

• It's easy to delete and create partitions

• Can format a drive to one of many file systems

• The download size is really small

What We Don't Like

• No graphical user interface

• Takes a while to start using because you have to boot to the software

• Must enter the exact size of the partition you want to make

• Doesn't save changes automatically

• No option to restart or exit the program

• No longer updates

Like GParted, Cute Partition Manager doesn't run from within the OS. Instead, you must install it to a bootable device like a disc or a flash drive. This means you can use it even if you don't have an operating system installed at all.

Cute Partition Manager can be used to change the file system of a disk and create or delete partitions. Any changes you make are queued up and can be undone because they are only applied when you save them.

Cute Partition Manager is completely text-based. This means you can't use your mouse to select the different options — it's all done with the keyboard. Don't let this scare you off, though; there aren't that many menus and so it's not really a problem.

Macrorit Partition Expert

What We Like

• Program interface makes it easy to use and understand what you're doing

• Supports common and advanced features

• Queues changes until you apply them all at once

• Everything you're able to do is shown outright; no hidden menu options

• There's a portable option

What We Don't Like

• Doesn't support dynamic disks

• Free for personal use only

• Can't manipulate disks bigger than 32 TB

I love Macrorit Partition Expert's user interface because it's super clean and uncluttered, making it very easy to use. All the available operations are listed out on the side, and none of them are hidden away in menus.

Some of the actions you can perform to a disk with Macrorit Partition Expert include resize, move, delete, copy, format, and wipe a volume, as well as change the volume's label, convert between a primary and logical volume, and run a surface test.

Like most of the partition management software in this list, Macrorit Partition Expert doesn't actually make any changes to the partitions until you apply them with the Commit button.

One thing I don't like about Macrorit Partition Expert is that it doesn't support dynamic disks.

A portable version is also available from the Macrorit website.

Paragon Partition Manager Free

What We Like

Mac Merg Tool For Source Tree Git

• Supports plenty of basic features

• Walks you through a step-by-step wizard

• Previews changes before committing to them

• Supports common file systems

What We Don't Like

• Missing features found in most disk partitioning tools

• Not every feature is free to use; some require you to upgrade to the pro version

• Not free for business usage; just personal

If walking through wizards helps you feel more comfortable making changes to partitions, then you'll like Paragon Partition Manager Free.

Whether you're creating a new partition or resizing, deleting, or formatting an existing one, this program has you move through a step by step process to do it.

Paragon Partition Manager Free supports common file systems like NTFS, FAT32, and HFS.

Unfortunately, a number of additional features are disabled in Paragon Partition Manager, available only in the pro version.

IM-Magic Partition Resizer

What We Like

• Quick install

• Lots of options

• Seagate nas discovery tool. Accessing all the options from anywhere is easy

• Shows a preview of what will happen after you save the changes

What We Don't Like

• Some features only work if you upgrade to the paid version

• Free for home/personal use only

IM-Magic Partition Resizer works very much like the tools mentioned above. It installs quickly and is super simple to use.

With this tool, you can move partitions, resize partitions (even the active one), copy partitions, as well as change the drive letter and label, check the partition for errors, delete and format partitions (even with a custom cluster size), convert NTFS to FAT32, hide partitions, and wipe all that data off of partitions.

All of those actions are extremely easy to find because you just have to right-click the device you want to manipulate. As you perform these actions, you'll see the program update in real time to reflect them so that you can see how it will look when everything has been applied.

Then, when you're happy with the results, just hit the big Apply Changes button to put everything into action. If you have to reboot for anything to take effect, IM-Magic Partition Resizer will tell you so.

You can also view the properties of any drive, to see its NT object name, GUID, file system, sector size, cluster size, partition number, physical sector number, total number of hidden sectors, and more.

The only downfall I can see with this program is that a few of the features require that you upgrade to a paid edition. For example, you can't make the bootable media program that they support unless you pay for it.

Tenorshare Partition Manager

What We Like

• Really simple interface that's easy to use

• Works with lots of file systems

• Queues up the changes before applying them

• Supports only basic partitioning features

What We Don't Like

• Unable to manipulate the system partition

• Hasn't been updated in a long time

Like a number of the partition software tools we've already mentioned, Tenorshare Partition Manager has a natural feel to resizing partitions through a slider bar setting.

One thing I really like about Tenorshare Partition Manager is the interface they chose to use. The options are easily accessible from the top of the window instead of having to push through menus to find what you need like with most tools.

Several file system types can be viewed like EXT2/3/4, Reiser4/5, XFS, and JFS, but partitions can be formatted only in the NTFS or FAT32 file system.

One thing I don't like about Tenorshare Partition Manager that sets it apart from nearly all of the programs from above is that it can not resize the partition that Windows is installed to, very often the thing you want to use a partition management program for!

Merge for macOS integrates with most version control (VC), software configuration management (SCM) and other applications that allow a third-party file comparison (diff) or file merging tool to be specified. This page contains instructions for integrating Merge with the following applications:

Integration with many SCM systems requires the Professional Edition of Merge to enable the comparison of two modified versions of a file with their common ancestor.

Other applications

If your chosen application isn’t listed on this page, you may find the information for integrating Merge for Windows with other applications to be a helpful starting point. You may also be able to integrate Merge with another application yourself, using the Merge AppleScript API or command-line utility.

If you have instructions for integrating Merge with other systems, or corrections to the information presented below, please contact us to let us know so that we can update this list.

AccuRev

The AccuRev macOS client can be configured to use Araxis Merge for file comparison and merge operations.

These steps are believed to work with AccuRev 5.2.

To configure the AccuRev client to use Merge for file comparison:

• In the AccuRev client, choose Preferences… from the Tools menu.

• Select the Diff/Merge tab.

• In the Diff entry field, enter the following:

• Close the Preferences window.

To configure the AccuRev client to use Merge for file merging:

• The Araxis Merge compare utility cannot be used directly for file merging by the AccuRev client, which passes quoted filenames and expects a particular return code on success. To work around this, create a file ac-merge-shim.sh in /usr/local/bin/ (or another location of your choosing) with the following content:

• Make the ac-merge-shim.sh script executable. For example, run the following command in the macOS Terminal (replacing /usr/local/bin with the full path to the shim file as necessary):

• In the AccuRev client, choose Preferences… from the Tools menu.

• Select the Diff/Merge tab.

• In the Merge entry field, enter the following:

  Note: If necessary, replace the instance of /usr/local/bin/ with the full path to the ac-merge-shim.sh script.

• Close the Preferences window.

Cornerstone

Zennaware Cornerstone is a Subversion client that has built-in support for Merge. The following instructions have been tested with Cornerstone v2.7.9.

To configure Cornerstone to use Merge:

• Choose Cornerstone▸Preferences…
• Select the General category.
• Click the External compare tool drop-down field and choose Araxis Merge.
• Click the External merge tool drop-down field and choose Araxis Merge.
• Close the Preferences window.

Dreamweaver

Adobe (Macromedia) Dreamweaver CS6 integrates with Araxis Merge and can launch a two-way file comparison. Consequently, the Standard Edition of Merge is sufficient if you will be using it only with Dreamweaver.

The following instructions have been tested with Dreamweaver CS6 v12.0.

To configure Dreamweaver CS6 to use Merge as the file comparison tool:

• Choose Dreamweaver▸Preferences…

• Select the File Compare category.

• In the Choose application to compare files field, enter the following:

• Click OK to dismiss the Preferences dialog.

Eclipse

For Eclipse, see the entry for Subclipse.

Git

Merge integrates tightly with Git. Araxis provides a Git File System Plugin to enable Merge to access files in Git depots directly. For file comparisons (but not folder comparisons), Merge is also able to populate the Versions button drop-down versions menu with other revisions of each file being compared. For more information, see Comparing Text Files (or Typed/Pasted Text).

Git can also be configured to use Merge for file comparison and merge operations.

The following configuration steps have been tested with Git v1.7.12.4.

To use Araxis Merge for file comparison and file merging:

• Ensure that the command-line utilities have been installed as described in the Installing the Merge command-line utilities section of the How to Install page.

• Update the Git configuration file by adding the following diff and merge tool configurations:

• To compare files, use the git difftool command. To resolve conflicting changes after merging files from a branch or remote repository, use git mergetool.

• As of Git v1.7.11, the git difftool command can be run with the --dir-diff option. This will open a folder comparison showing all the changed files.

IntelliJ IDEA/PhpStorm

IntelliJ IDEA and PhpStorm can be configured to use Merge for file and folder comparisons, and also for file merging. The following steps have been tested with IntelliJ IDEA 12.1.1.

To configure IntelliJ IDEA/PhpStorm to use Merge as the file and folder comparison tool:

• Choose IntelliJ IDEA/PhpStorm▸Preferences…

• Select External Diff Tools in the list on the left side of the Settings window.

• Check the Use external tool to compare folders checkbox. In the accompanying Path to executable field, enter the following:

• Check the Use external tool to compare files checkbox. In the accompanying Path to executable field, enter the following:

To configure IntelliJ IDEA/PhpStorm to use Merge as the merging tool:

• Choose IntelliJ IDEA/PhpStorm▸Preferences…

• Select External Diff Tools in the list on the left side of the Settings window.

• Check the Use external merge tool checkbox. In the accompanying Path to executable field, enter the following:

• Enter the following in the Parameters field:

If Merge is used to make changes to a file that IntelliJ IDEA/PhpStore has stored in memory, perhaps following a merge operation, IntelliJ IDEA/PhpStorm may ask whether you wish to keep the file it has in memory or update it with the contents of the modified file on disk. It is most likely you will want to load changes from disk following a merging operation.

Mac Merg Tool For Source Tree Download

MacHg

MacHg is a fully featured free Mercurial client for macOS. MacHg provides built-in support for Araxis Merge.

The following instructions have been tested with MacHg v0.9.25.

To configure MacHg to use Merge:

• Open the MacHg Preferences window.
• Select the Mercurial page.
• In the Merge and Diff Tool section, choose AraxisMerge for both the For Diffs use and For Merges use fields.

Mercurial

Merge integrates tightly with Mercurial. Araxis provides a Mercurial File System Plugin to enable Merge to access files in Mercurial depots directly. Merge is also able to populate the Versions button drop-down versions menu with other revisions of each file being compared. For more information, see Comparing Text Files (or Typed/Pasted Text).

Mercurial can also be configured to use Merge for file/folder comparison and file merge operations. The comparison integration uses the Extdiff extension, which is supplied with Mercurial.

The following instructions have been tested with Mercurial v1.8.4.

To configure Mercurial to use Araxis Merge for file merging:

• Ensure that the command-line utilities have been installed as described in the Installing the Merge command-line utilities section of the How to Install page.

• Update the appropriate Mercurial configuration file to add the following merge tool configuration:

To configure Mercurial to use Araxis Merge for file comparison:

• Ensure that the command-line utilities have been installed as described in the Installing the Merge command-line utilities section of the How to Install page.

• Update the appropriate Mercurial configuration file to create a new hg sub-command, arxdiff:

  The -wait argument to the compare utility is required to enable file comparisons to be recompared as a different type (text, binary or image) from within Merge and, in the case when Mercurial launches a folder comparison, to enable file comparisons to be launched from that folder comparison.

Examples of using hg arxdiff:

• Launch a two-way file comparison showing the changes to a modified file myfile.c:

• Launch a two-way file comparison of revisions 1 and 2 of myfile.c:

• Launch a two-way file or folder comparison (as appropriate, depending upon the number of files modified) to show all the changes within the current working directory:

• Launch a two-way file or folder comparison (as appropriate, depending upon the number of files modified) to show all the changes applied by the changeset with id 0bc544fad9e6:

Path Finder

Path Finder can be configured to use Araxis Merge for file comparison. Allowing the launching of Merge from Path Finder’s Compare… context menu when two files are selected.

The following instructions have been tested with Path Finder 7.

To configure Path Finder to use Merge for file comparison:

• In Path Finder, choose Preferences… from the Path Finder menu.

• Select the Features tab.

• Select the File Comparison item.

• Click the Select tool… button.

• Navigate to and select:

• Click the Choose tool button.

• Close the Preferences window.

Perforce

Merge integrates tightly with Perforce. Araxis provides a Perforce File System Plugin to enable Merge to browse Perforce depots directly. This means that, for example, you can compare branches of source code directly within a depot without syncing them to the client workspace. Merge is also able to populate the Versions button drop-down versions menu with other revisions of each file being compared. For more information, see Comparing Text Files (or Typed/Pasted Text).

To browse Perforce repositories directly from Merge:

• See the instructions on the Perforce File System Plugin page.

To configure P4V (2007.2 release or later) to use Merge for file comparison and merging:

• Ensure that the command-line utilities have been installed as described in the Installing the Merge command-line utilities section of the How to Install page.

• Choose Preferences… from the P4V menu.

• Select the Diff tab.

• Select the Other application radio button (or Use external application in older versions of P4V).

• For the Location field, enter the following:

• Ensure that the Arguments field reads %1 %2. This step can be ignored for older versions of P4V, which do not have this field.

• Select the Merge tab.

• Select the Other application radio button (or Use external application in older versions of P4V).

• For the Location field, enter the following:

• Ensure that the Arguments field reads %b %1 %2 %r. This step can be ignored for older versions of P4V, which do not have this field.

• Click the OK button to dismiss the Preferences dialog.

• P4V should now open Merge for its comparison and interactive merging operations.

To configure the Perforce command-line tool (p4) to use Merge:

• Ensure that the command-line utilities have been installed as described in the Installing the Merge command-line utilities section of the How to Install page.

• Set the P4DIFF environment variable to the full path of the araxisp4diff utility. Also, set the P4MERGE environment variable to the full path to araxisp4winmrg.

  Add the following to your .bash_profile:

• When you open a new command shell, Merge should now be invoked as appropriate by the Perforce command-line tools. For example,

  will open up a two-way comparison for each of the files that you have opened for edit (including any binary or image files) in your default changelist.

SmartGit/Hg

SmartGit/Hg can be configured to use Araxis Merge for file comparison and merge operations.

To configure SmartGit/Hg to use Araxis Merge for file comparison:

• Choose Preferences… from the SmartGit/Hg menu.

• Expand Tools in the tree on the left.

• Select Diff Tools in the tree on the left.

• Select the * pattern in the table and click the Edit… button.

• Select the External diff tool radio button.

• In the Command entry field, enter the following:

• In the Arguments entry field, enter the following:

• Click OK to apply the changes and exit the Edit dialog.

To configure SmartGit/Hg to use Araxis Merge for file merging:

• Choose Preferences… from the SmartGit/Hg menu.

• Expand Tools in the tree on the left.

• Select Conflict Solver in the tree on the left.

• Select the External Conflict Solver radio button.

• In the Command entry field, enter the following:

• In the Arguments entry field, enter the following:

• Click OK to apply the changes and exit the Preferences dialog.

SmartSVN/SmartCVS

SmartSVN and SmartCVS clients can be configured to use Araxis Merge for file comparison and merge operations.

Note that the ability to use an external tool for solving conflicts is not available in the Foundation version of SmartCVS.

The following instructions have been tested with SmartSVN v7.5.4.

To configure SmartSVN/SmartCVS to use Araxis Merge for file comparison:

• Choose Preferences… from the SmartSVN or SmartCVS menu.

• Select File Compare in the tree on the left (File Comparators in SmartCVS).

• Select the * pattern in the table and click the Edit… button.

• Select the External Comparator radio button.

• In the Command entry field, enter the following:

• In the Arguments entry field, enter the following:

• Click OK to apply the changes and exit the Edit dialog.

To configure SmartSVN/SmartCVS to use Araxis Merge for file merging:

• Choose Preferences… from the SmartSVN or SmartCVS menu.

• Select Conflict Solver under Actions in the tree on the left.

• Select the External Conflict Solver radio button.

• In the Command entry field, enter the following:

• In the Arguments entry field, enter the following:

  Note: The '${baseFile}' template is not required when using SmartCVS.

• Click OK to apply the changes and exit the Preferences dialog.

SourceTree

Atlassian SourceTree is a client for Git and Mercurial. The following instructions have been tested with SourceTree v1.6.0.

To configure SourceTree to use Merge for comparing files:

• Open the SourceTree Preferences dialog and choose the Diff tab.

• Select Araxis Merge as the Visual Diff Tool.

To configure SourceTree to use Merge for merging files:

• Open the SourceTree Preferences dialog and choose the Diff tab.

• Select Araxis Merge as the Merge Tool.

Subclipse

Subclipse is an Eclipse plugin providing support for Subversion within the Eclipse IDE. It can be configured to use Merge as its merging tool. Merge will then be used whenever you choose Edit Conflicts from a Team menu in Eclipse.

Merge can also integrate directly with Subversion. Please see Subversion section for more information.

The following steps have been tested with Subclipse v1.8.18, Eclipse v4.2.1 and Subversion v1.6.18

To configure Merge as the Subclipse file merging tool:

• Ensure that the command-line utilities have been installed as described in the Installing the Merge command-line utilities section of the How to Install page.

• Unfortunately, the compare utility cannot be used directly to launch Merge, since Subclipse does not appropriately divide the user-specified list of external conflict program parameters. It is therefore necessary to create a shell script that will divide the list of parameters appropriately.

  Create a file /usr/local/bin/subclipse-shim.sh with the following content:

• In the Eclipse Preferences window, select the Team▸SVN▸Diff/Merge page.

• Select the External radio button.

• In the adjacent entry field, enter the following:

• In the Parameters field, enter the following:

• Click the Apply button.

Subversion

Merge integrates well with Subversion. Araxis provides a Subversion File System Plugin to enable Merge to browse Subversion repositories directly. This means that, for example, you can compare branches of source code directly within a repository without syncing them to the client workspace. Merge is also able to populate the Versions button drop-down versions menu with other revisions of each file being compared. For more information, see Comparing Text Files (or Typed/Pasted Text).

See also the entries for Subversive, svnX and Subclipse.

To browse Subversion repositories directly from Merge:

• See the instructions on the Subversion File System Plugin page.

To configure the Subversion command-line tool (svn) to use Merge:

The following instructions have been tested with Subversion v1.6.18 and v1.7.8.

• Open your ‘SVN configuration area’ configuration file in a text editor. The default location for this file is ~/.subversion.

• Uncomment the line that specifies the diff-cmd and set its value to the path of the Merge araxissvndiff executable that you have installed on your machine:

• The Subversion command-line client versions 1.5 and later can be configured to merge non-conflicting changes automatically, but to launch Merge interactively to resolve conflicting changes.

  If you wish to have Subversion merge non-conflicting changes itself, and use Merge only for conflicting changes, add a merge-tool-cmd line to set the path of the Merge araxissvnmerge executable:

  The merge-tool-cmd option is ignored when the value of the diff3-cmd option is defined. Ensure that the value of the diff3-cmd option has not been defined.

• Alternatively, if you would rather use Merge to resolve all changes, you can define the diff3-cmd configuration option instead of merge-tool-cmd. (Note that diff3-cmd is the only option for Subversion versions prior to v1.5.)

  If defined, diff3-cmd should be set to the path of the Merge araxissvndiff3 command-line utility:

• Save the modified configuration file and exit the text editor.

• Merge will now be launched when performing Subversion commands (e.g. svn diff, svn update and svn merge) that require a two or three-way comparison.

Subversive

Subversive, the official Eclipse plugin can be configured to use Merge as its merging tool. It provides support for Subversion within the Eclipse IDE. Merge will then be used for file comparisons, and for merging whenever you choose Edit Conflicts from a Team menu in Eclipse.

Merge can also integrate directly with Subversion. Please see Subversion section for more information.

The following steps have been tested with Subversive v1.0.0, Eclipse v4.2.1 and Subversion v1.6.18

To configure Merge as the Subversive file comparison and merging tool:

• Unfortunately, the compare utility cannot be used directly to launch Merge, since Subversive does not divide the user-specified lists of program arguments appropriately. It is therefore necessary to create a shell script to do this.

  Create a new shell script /usr/local/bin/subversive-shim.sh with the following content:

• To configure Subversive to use an external tool for file comparisons, the user specifies the location of the tool and a list of arguments that are to be sent to it. When configuring this list of arguments, the tokens ${mine}, ${base} and ${theirs} are used to represent the location of the files to be compared. When a file comparison is invoked, tokens in the list of arguments are replaced with paths to the files to be compared. Unfortunately, Subversive is inconsistent in which tokens it replaces with paths, depending on how the file comparison is invoked in Eclipse. The remote file is sometimes passed using ${base} and at other times ${theirs}. Fortunately, when ${base} is used, ${theirs} is replaced with no text, and it is therefore possible to create a script that will launch Merge using the paths from ${mine} and ${theirs}, unless ${theirs} is empty text, in which case the paths in ${mine} and ${base} are compared instead.

  Create a file /usr/local/bin/araxissubversivediff.osa with the following content:

• In the Eclipse Preferences window, select the TeamSVNDiff Viewer page.

• Click the Add… button.

• In the Extension or mime–type field, enter the following:

• Within the Diff program arguments box, enter the following into the Program Path field:

• In the larger field beneath, enter the following:

• Within the Merge program arguments box, enter the following into the Program Path field:

• In the larger field beneath, enter the following:

• Click the OK button.

• Review the new settings in the Diff Viewer table.

• Click the Apply button.

Surround SCM

Surround SCM has built-in support for Araxis Merge. To set Araxis Merge as the default application for file comparison and merging:

• Choose User Options… from the Tools menu.
• Select the Diff/Merge tab.
• Edit the settings for a selected file type.
• Select Araxis Merge from the comparison application drop-down list.

Please see the Surround SCM website for more details.

svnX

svnX is an open source GUI for most features of the Subversion client. It has built-in support for Merge.

Mac Merg Tool For Source Tree Repositories

To configure svnX to use Merge:

• Choose Araxis Merge as the Diff application in the svnX Preferences window.
• Please be sure to read the svnX online help for information about setting-up svnX to work with Merge. At the time of writing, svnX requires the araxissvndiff command to be installed in a particular location. The command can be copied from the /Applications/Araxis Merge.app/Contents/Utiltities folder to the required location.

TortoiseHg

TortoiseHg can be configured to use Araxis Merge for file comparison and merge operations.

To configure TortoiseHg to use Araxis Merge for file comparison:

• Configure Mercurial to use Araxis Merge for file comparison, as described in the Mercurial section.

• Choose Preferences from the TortoiseHg menu.

• Select TortoiseHg in the list on the left.

• In the Visual Diff Tool drop-down field, choose arxdiff.

• Click OK to apply the changes and close the TortoiseHg Settings window.

To configure TortoiseHg to use Araxis Merge for file merging:

• Configure Mercurial to use Araxis Merge for file merging, as described in the Mercurial section.

• Choose Preferences from the TortoiseHg menu.

• Select TortoiseHg in the list on the left.

  Instant Messages, Video and Audio Chats, and Phone Calls 8. Instant Messages, Video and Audio Chats, and Phone Calls • • • • 9. Other Bundled Apps 9. Exif tool for mac os serria.

• In the Three-way Merge Tool drop-down field, choose araxismergetool.

• Click OK to apply the changes and close the TortoiseHg Settings window.

Tower

Tower is a client for Git that can be easily configured to use Araxis Merge as its preferred comparison and merging tool. The following instructions have been tested with Tower v1.5.0.

To configure Tower to use Merge:

• Open Tower’s Preferences window.
• Select the Git Config tab.
• Choose Araxis Merge in the Preferred Diff Tool and Preferred Merge Tool drop-downs.

Veracity

Veracity is an Open Source, distributed version control and bug tracking system for Windows, macOS, and Linux. SourceGear, the company behind Veracity, has helpfully provided the information here.

Veracity supports Araxis Merge out of the box for both diff and merge operations. Simply use --tool araxis with any command that supports external comparison or merging tools. Alternatively, you can configure Merge as your default tool for various operations as described below.

For support using Veracity with Araxis Merge, please see http://veracity-scm.com/qa.

Find great deals on eBay for vintage mac tool box. Shop with confidence. Feb 04, 2016  Vintage MAC Tool Box Refurbished So a few years ago I was presented with an opportunity to purchase a vintage MAC tool box. A local mechanic was purchasing a new bottom box, and trading in his old one. MAC TOOL BOX/Craftsman Tool Box using Codes YOU ARE PURCHASING (2) KEYs cut to code. Get that extra key or if you have lost your key. Price includes cutting the key to your code. Used mac tool boxes for sale.

To make Araxis Merge the default interactive comparison tool for text files:

To make Araxis Merge the default interactive comparison tool for binary files:

To make Araxis Merge the default interactive merging tool for text files:

To make Araxis Merge the default interactive merging tool for binary files:

Versions

The Versions client for Subversion can be easily configured to use Araxis Merge. The following instructions have been tested with Versions v1.2.2.

To configure Merge as the Versions comparison tool:

Mac Merg Tool For Source Tree Ubuntu

• Open the Preferences window within Versions.
• Choose Araxis Merge from the File Comparison drop-down field.